Altec Industries, Inc. recalls
Altec Industries, Inc. is named on 46 recalls in Recall Relay's records since November 2023, from NHTSA; the most recent was October 9, 2026.
All 46, newest first.
-
Mediumest. risk
Altec Industries, Inc.: Front Bumper May DetachA front bumper that detaches can become a road hazard and increase the risk of a crash. In addition, the bolts can fail suddenly during winch operation, increasing the risk of injury.
-
Mediumest. risk
Altec Industries, Inc.: Missing Rearview CameraA missing rearview camera can reduce the driver's view behind the vehicle, increasing the risk of a crash.
-
Mediumest. risk
Altec Industries, Inc.: Platform Access Step May Separate from VehicleA step that separates or becomes unstable while in use, increases the risk of a fall or injury.
-
Mediumest. risk
Altec Industries, Inc.: Boom Stow Auto-Neutral System Improperly WiredWhen the vehicle is moved or driven with the boom out of stow, the vehicle could exceed the recorded travel height, increasing the risk of a crash.
-
Highest. risk
Altec Industries, Inc.: Strobe Light May Short CircuitAn electrical short circuit can increase the risk of a fire.
-
Mediumest. risk
Altec Industries, Inc.: Automatic Brake System Improperly CalibratedAn improperly calibrated system may have a delayed braking response, increasing the risk of a crash.
-
Mediumest. risk
Altec Industries, Inc.: Turntable Fasteners Not Heat TreatedA fastener that has not been heat treated could fail, resulting in separation of the pedestal and turntable, increasing the risk of injury.
-
Highest. risk
Altec Industries, Inc.: Unprotected Boom Stow Wire May Short and Cause FireAn overheated wire can ignite flammable material in the cargo area, increasing the risk of fire.
-
Highest. risk
Altec Industries, Inc.: Incorrectly Routed Inverter AC Wiring May Short and OverheatA short may cause the inverter AC wiring to overheat, increasing the risk of a fire.
-
Mediumest. risk
Altec Industries, Inc.: Incorrect Pole Rack Capacity RatingWhile using the pole rack at full capacity, an incorrect high vertical center of gravity during braking and cornering may lead to a loss of vehicle control, increasing the risk of a crash.
-
Mediumest. risk
Altec Industries, Inc.: Transmission Park Interlock May Be MissingAn aerial device that operates while the vehicle is in gear or neutral can cause unexpected vehicle movement and increase the risk of injury.
-
Mediumest. risk
Altec Industries, Inc.: Missing Welds on Personnel Jib PlatformMissing welds can lead to platform joint failure due to fatigue or overload, resulting in the platform falling from the boom tip, increasing the risk of injury.
-
Mediumest. risk
Altec Industries, Inc.: Emergency Stop May FailHydraulic functions that do not immediately stop when the ground level E-stop is pressed, increase the risk of injury.
-
Mediumest. risk
Altec Industries, Inc.: Improperly Installed Front End RadarWhile driving, the brakes may activate unexpectedly without the driver's input, increasing the risk of a crash.
-
Mediumest. risk
Altec Industries, Inc.: Inoperative Emergency Stop SwitchAn inoperative emergency stop switch increases the risk of injury.
-
Mediumest. risk
Altec Industries, Inc.: Chassis Lighting Harness Not InstalledLoss of body lighting or trailer lights increases the risk of a crash.
-
Mediumest. risk
Altec Industries, Inc.: Incorrect Low Tire Pressure on Certification LabelAn incorrect pressure rating may lead to underinflated tires, increasing the risk of a tire blowout or a crash.
-
Mediumest. risk
Altec Industries, Inc.: Chassis Engine May Start UnexpectedlyAn engine that starts unexpectedly increases the risk of injury to anyone near the engine compartment during maintenance operations.
-
Highest. risk
Altec Industries, Inc.: Hydraulic System May Have Missing Check ValveReduced insulation can conduct electricity to the operator or others touching the vehicle, increasing the risk of injury and death.
-
Highest. risk
Altec Industries, Inc.: Inadequate Fuse Protection Can Cause FireWiring without adequate protection may short circuit, increasing the risk of a fire.
-
Mediumest. risk
Altec Industries, Inc.: Improperly Formed Shear Plate LockboltsShear plate lockbolt failure can result in separation of the elevator sub-base and truck frame, increasing the risk of injury.
-
Highest. risk
Altec Industries, Inc.: Emergency Stop May Not FunctionAn emergency stop that does not shut off the unit during an emergency increases the risk of death or serious injury.
-
Highest. risk
Altec Industries, Inc.: Battery Cables May Overheat and Cause FireAn overheated battery cable increases the risk of a fire.
-
Highest. risk
Altec Industries, Inc.: Auxiliary Engine Circuit May Overheat and Cause FireOverloaded circuits may overheat and increase the risk of fire.
-
Highest. risk
Altec Industries, Inc.: Exhaust May Overheat Outrigger PadThe exhaust may overheat the outrigger pad, increasing the risk of a fire.
-
Highest. risk
Altec Industries, Inc.: Platform Retaining Plate Bolts may be Improperly TightenedLoose bolts may allow the retaining plate or platform to detach, becoming a road hazard and increasing the risk of a crash. The platform may also detach from the boom tip while elevated with occupants aboard, increasing the risk of injury or death.
-
Mediumest. risk
Altec Industries, Inc.: Incorrect GAWR on Certification LabelAn overloaded vehicle can increase the risk of a crash.
-
Mediumest. risk
Altec Industries, Inc.: Blown Fuse May Cause Engine ShutdownAn engine shutdown increases the risk of a crash.
-
Mediumest. risk
Altec Industries, Inc.: Cable Entry Step May DetachA cable step that fails during use increases the risk of injury.
-
Mediumest. risk
Altec Industries, Inc.: Front Bumper May DetachA front bumper that detaches can become a road hazard and increase the risk of a crash. In addition, the bolts can fail suddenly during winch operation, increasing the risk of injury.
-
Mediumest. risk
Altec Industries, Inc.: Unexpected Activation of Emergency BrakesUnexpected activation of the emergency brakes may cause the vehicle to stop suddenly, increasing the risk of a crash.
-
Mediumest. risk
Altec Industries, Inc.: Voltage Spikes from Power Distribution ModuleA damaged TCCM and disrupted chassis functions can result in a loss of handling and control or brake performance, increasing the risk of a crash.
-
Highest. risk
Altec Industries, Inc.: Fuel Lines May Chafe and Cause Fuel LeakA fuel leak in the presence of an ignition source can increase the risk of a fire.
-
Mediumest. risk
Altec Industries, Inc.: Pedestal and Truck Frame May SeparateA broken side plate may result in pedestal and truck frame separation, increasing the risk of injury.
-
Mediumest. risk
Altec Industries, Inc.: Unseated Retaining Ring May Cause Cylinder FailureUnintended boom movement increases the risk of injury.
-
Mediumest. risk
Altec Industries, Inc.: Front Axle Load May FailOverload of the front axle capacity could cause it to fail and instability, increasing the risk of injury.
-
Mediumest. risk
Altec Industries, Inc.: Lower Boom May FailA loss of lower boom support during operation could cause the lower boom to fall, increasing the risk of injury.
-
Mediumest. risk
Altec Industries, Inc.: Crane Outrigger Shoes May Crack and FailA loss of stability during operation could cause the crane to fall, increasing the risk of an injury.
-
Highest. risk
Altec Industries, Inc.: Hydraulic Hoses May Overheat and Cause a FireHydraulic hoses that overheat can increase the risk of a fire.
-
Mediumest. risk
Altec Industries, Inc.: Blown Fuse May Cause Engine ShutdownAn engine shutdown increases the risk of a crash.
-
Highest. risk
Altec Industries, Inc.: Fuel and Brake Lines May LeakA brake fluid leak can cause brake failure, increasing the risk of a crash. A fuel leak in the presence of an ignition source can increase the risk of a fire.
-
Highest. risk
Altec Industries, Inc.: A/C Hoses May Overheat and Cause a FireA/C hoses that overheat can increase the risk of a fire.
-
Mediumest. risk
Altec Industries, Inc.: Lights May Fail From Overloaded Wiring/FMVSS 108Lights that fail to illuminate can reduce the vehicle's visibility to other drivers, increasing the risk of a crash.
-
Mediumest. risk
Altec Industries, Inc.: Damaged Cylinder Feeder Tube May Leak OilUncontrolled movement of the boom can increase the risk of injury.
-
Highest. risk
Altec Industries, Inc.: Engine Compartment Fire from Short CircuitA short circuit increases the risk of a fire.
-
Mediumest. risk
Altec Industries, Inc.: Misaligned Welder May Detach from VehicleLoose fasteners can allow the welder to detach from the vehicle, becoming a road hazard and increasing the risk of a crash.
This page groups recalls by the company name the agency printed, so it can include different companies with similar names, and a recall may name a store or distributor rather than the maker. It counts the recalls in Recall Relay's records, not a company's whole history; an FDA recall that lists several products counts once. Open a recall to see its details and the agency's official notice, which is always the final word. Recall Relay isn't affiliated with any agency or with the companies named here.
Severity labels say where they come from: “official” is the agency's own class, “advisory” is based on the agency's safety warning, and “est. risk” is Recall Relay's estimate from the hazard description, not an agency classification.
Hear about the next one
Recall Relay can email you when a new recall mentions Altec Industries, Inc. or any words you choose. Start with a free key (no card needed), then set up alerts on your account page.
Get recall alerts